 |
|
|
Go 
|
New 
|
Find 
|
Notify 
|
|
Reply 
|
|
Admin 
|
New PM! 
|
Member
|
55. Keep the whites at the bottom.
Just one more sip.
|
| |
|
Member
|
55 - 60 would be best but you also need to pay close attention to two things. Temp. fluctuation and humidity. You can buy a Hygrometer at any pet supply store. You want to keep the humidity between 60 - 70% bellow 50% is not good. If you find that your humidity level is low get a small bowl and fill it with water and put it in the bottom of the unit. One other thing that many folks worry about with these small units is vibration, it seems as if there are two camps but many think that the vibration from these small units will harm the wine. One way to help protect against vibratin is to put the unit on carpet. Hope this helps.
pissing people off since 1971!
'A government big enough to give you everything you want, is big enough to take away everything you have.' -Thomas Jefferson
|
| |
| Posts: 3262 | Location: oklahoma city, usa | Registered: Aug 15, 2004 |    |
|
Member
|
Check the documentation for the wine fridge. Sometimes, the manufacturer will graduate the temperature, so the bottom of the fridge will be about 5% colder than the top allowing you to seperate your reds and whites. I like to set my fridge at 57 degrees. Equally important is finding a flat, even surface to place it on and leaving enough room in the back for proper ventilation. Enjoy your new wine fridge. Adrian Grape Apparel - Wine T-Shirts
|
| |
| Posts: 17 | Location: Florida | Registered: Mar 22, 2007 |    |
|
Member
|
Even better would be a temperature / humidity monitor with memory, so that you can see how much it varies. And if you could spare 1/30th of your capacity (not a good trade with your sized unit) you can even stick the temperature probe in a bottle to see how much the liquid temperature varies. But probably all of this is not as important for your case. With only a 30 bottle capacity, I'm assuming that you aren't looking to store your bottles for many years before opening.
|
| |
| Posts: 1386 | Location: San Diego, CA | Registered: Nov 19, 2005 |    |
|
Member
|
quote: Originally posted by seanr7:
One other thing that many folks worry about with these small units is vibration, it seems as if there are two camps but many think that the vibration from these small units will harm the wine. One way to help protect against vibratin is to put the unit on carpet.
That depends on the unit. Nowadays, many use the Peltier effect to cool the wine, and therefore have no compressor or any other moving parts that would cause vibration. - Jeff
|
| |
| Posts: 234 | Location: Nashville, TN | Registered: Apr 12, 2007 |    |
|
Member
|
Thank you very much everyone...your answers have been incredibly helpful! Being in the Philippines, humidity is incredibly high so I don't know how much I have to worry about that (?)  And yes, I don't think I will be doing much super-long term cellaring, I really just want somewhere to keep my wines out of the heat!  The carpet idea is great- I actually have the same unit in my restaurant and it does vibrate a bit- I am going to implement that in the resto as well.  Thanks again! This forum is awesome! "Carpe Vinum!"
|
| |
| Posts: 30 | Location: Philippines | Registered: Mar 16, 2006 |    |
|
Member
|
Just a quick note on some of those thermoelectric (non-compressor) models. The they generally can only cool down to about 20 degrees less than ambient temp and the model I have doesn't like anything over 78 degrees Fahrenheit. If you're in the Philippines and it's hot, just something to keep in mind. As you said, though, at least you don't have to worry about humidity... 
-- Love Wine? So do we! -- BottleMonkey.com (http://www.bottlemonkey.com/) --
|
| |
|
 | Please Wait. Your request is being processed... |
© Wine Spectator Online 2006
|
|
 |

 

   

Copyright © 2005 Wine Spectator, Inc. All Rights Reserved
 |
|